基本性能.jpg

  chemtecone.comHarden, dustproof, densify: Unlike other sealants, Kentic is a water-insoluble substance created by a chemical reaction to help separate calcium from cement. It can increase the density and hardness of cement so that cement structure more wear-resistant, wear-resistant. This chemical reaction produces a material that can fill up the pores, which makes the cement much denser. Neither the liquid nor the solid can penetrate the cement, thus preventing any contamination, the structure of the treated cement is highly alkaline (high PH value) .

  chemtecone.comMaintenance: after the cement finish has been polished (when the cement has just begun to harden enough to support a person without leaving footprints) , the water-blocking effect is greatest if the product is used immediately. This product will immediately and cement free calcium and lime chemical reaction, produce a material can shrink pores, shrink the water in cement, thus gradually reduce the evaporation rate of water vapor. ChemTec can be used as a curing and hardening agent for cement surfaces. This product in the new cement surface water resistance effect is particularly obvious.

  chemtecone.comMaintenance:

  If you use ChemTec cement sealant on your concrete floor, you will be able to keep the concrete dense by continuous crystallization. After a unique chemical treatment, the surface will become more hard, dense, dustproof, easy to clean. These changes take approximately 6 to 12 months to occur inside your concrete.

  The concrete floor is very easy to absorb liquid spillage, so we recommend cleaning as soon as possible. This maintenance instruction is recommended by silicate densification experts including CHEMTEC International to help your concrete floor get densification effect.

  Please follow the following maintenance instructions for routine maintenance of your floor within the first few months after treatment with ChemTec cement sealant.

  ChemtecInternational company recommendations:

  For the first 1 to 12 months, ChemTec will penetrate the interior like a sealant before it is completely sealed. When the ground is being sealed, regular cleaning with a regular detergent will reduce and help dirt exudate.

  ● Wash frequently. Water will accelerate the reaction, promote the ground seal and produce gloss, recommended weekly cleaning 1 to 2 times;

  ● For oil spills on the ground, please use high PH detergent cleaning as soon as possible (acid detergent may damage the appearance of the surface) ;

  ● Do not wax the surface or use other sealant coating.

 Cleaning steps:

  1.The dirt residue on the surface of the impurities with a cloth or mop to remove.

  2.Use appropriate cleaning agent to spray or DAB on oil stains. If you do not remove the acid concentrate dirt, such as salt, vinegar, milk, juice, etc. , may leave traces on the ground, can use hot soda water as a cleaning agent; other dirt can use commonly used oil decomposition agent.

  3.2-3 minutes (seriously contaminated areas should be appropriately extended) after rinsing with water, while brushing with a hard brush repeatedly.

  4.Rinse the floor with plenty of water, then wipe dry.

  1-2 times a week cleaning: automatic cleaning machine can be used for routine cleaning

  Technical specifications:

  ● Surface Morse hardness: hardness from Morse 6 to more than 8

  ● Impermeability: the treated specimen was immersed in water for 48 hours, and the permeability was 0.33% . After soaking for 50 days, the permeability was 1.04% (ASTM-C-642)

  ● Wear resistance: wear resistance increased by 45% (ASTM-C-779)

  ● Anti-weathering performance: Freeze-thaw cycle 100 times, no spalling surface (ASTM-C-672)

  ● Resistance to chloride Ion Corrosion: ASTM testing, up to“Excellent standards.”. The diffusion coefficient of chloride ion was reduced by 51% by NEL method

  ● Anti-carbonation performance: Improve the anti-carbonation performance more than 3 times




Wechat

Tiktok